SeedDream 5.0 Lite

SeedDream 5.0 Pro is the sibling for faces; this page is the budget 2K tier.
Where you pick it
Settings → Model Preferences → Image Model. The choice applies to every sheet you generate from then on — character, location and prop images in step 2, regenerations, state images — until you change it. Sheets already made keep their pixels; nothing is re-rendered by switching.
What a sheet on this tier looks like
2K, like Pro: a 9:16 character sheet or a 16:9 location image with roughly twice the default tier’s pixel count. Rooms, streets, props and costumes come out with the detail the video tiers can use; faces are good, with Pro keeping the edge in skin texture under close-up.
How it reads your description
End to end, the family trait. A long location description with a stated light source, or a prop with several materials, lands as written. It also follows literal phrasing literally: describe causes, not results.
What it costs
Every account has 15 free sheets in total (across projects, any type) on a project whose script has been read, drawn on the default image model, Qwen-Image 3.0, only. On this tier, SceneMixer charges each sheet from the first one: 8 credits (about $0.05 at the lowest credit price). A rejected generation is not charged, and most failures are refunded automatically; a few kinds of failure are held until support checks them. Regenerating a sheet is a new charge; the old image stays until you replace it.
Against the default tier at 7 per sheet and Pro at 25.
Content checks
Description checked before rendering; a flagged description is not charged. See content rules and checks.
Common errors
What you may meet on this tier:
| What you see | Usual cause | What to do |
|---|---|---|
| “Blocked by content safety rules — edit the script or description and retry.” | A word or phrase in the character or scene description tripped the check | Edit the description and generate again |
| “The generation service hit a temporary problem. You weren’t charged — feel free to try again.” | The service was saturated; the site already tried again once | Generate again in a few minutes |
| A sheet that ignores part of the description | Too many details competing in one description | Put identity details first; trim decoration |
| Generate All stops partway | Balance ran out; the remaining sheets were not charged | Top up, then generate the rest |
When to switch tier
To Pro for the faces the series hangs on. To the default tier when 2K is not needed and every credit counts. Existing sheets are untouched.
| This tier | |
|---|---|
| Role | 2K locations, props and long descriptions on a budget |
| Price per sheet | 8 credits |
| Long descriptions | Read end to end |
| Faces | Good; Pro keeps the edge in close-up |
| State images | Edited from the base sheet |
| Free sheets | 15 per account, default tier only |
FAQ
Is Lite lower resolution than Pro?
No; both render at 2K. Pro renders finer skin texture on faces.
Is Lite a good default for locations?
Yes, when you want 2K plates; the default tier is cheaper if 2K is not needed.
Does it read long descriptions fully?
Yes, like Pro.
Can I use Lite for scenes and Pro for characters?
Yes, by switching the preference between the two groups. In SceneMixer, the preference switch lets you put scenes on Lite and characters on Pro.
Does switching affect existing sheets?
No. Regenerate the ones you want on the new tier.
Render your locations at 2K
Switch to SeedDream 5.0 Lite for the scene images, then decide which faces deserve Pro.
Updated November 15, 2026